How to Display the Good Shepherd and Prodigal Prints Together
By House of Joppa | Published: 2026-11-02
Category: How-to Guides
Pair The Good Shepherd and Prodigal prints in one wall or easel arrangement. Plan spacing, height, and lighting so both parables read clearly and feel balanced.
Quick answer
Hang The Good Shepherd and Prodigal prints as a balanced pair, either side by side at eye level or stacked with the shepherd above the prodigal. Keep the gap between them consistent and light both evenly so each parable reads clearly.
Why these two prints work as a pair
The Good Shepherd carries the message "Be still and know" with an image of Jesus as the shepherd, while Prodigal captures the moment of return with Christ kneeling in the grass, arms around a weary son. Together they move from guidance to mercy, which makes them a natural pairing for a hallway, bedroom, or prayer corner where you want a quiet narrative rather than a single isolated image.
Because both are prints on museum-grade fine art paper using acid-free archival inks, they share a similar surface and color depth. That consistency helps the pair look intentional even if you choose different frame styles or place one on an easel and the other on the wall.
Choosing a wall or easel setup
A wall arrangement suits a larger blank space and keeps the prints protected from bumps. An easel setup works better on a shelf, mantel, or side table where you want the art to be movable and close to a reading chair or bedside.
If you use the Petite Art Display Easel, check that the surface behind it is stable and that the print does not overhang the easel's 5-inch height. The easel is designed for small items, so it is best for a single print at a time rather than both.
Spacing and height checks before you commit
Treat the pair as one visual unit. A common mistake is hanging the first print too high, then discovering the second sits above eye level. Measure from the floor to the center of where the pair will sit, usually around 57 to 60 inches, and mark both centers before adding hardware.
Keep the gap between the two prints narrower than the width of one print so they read as a pair. If you stack them vertically, align the left and right edges precisely; if you hang them side by side, align the top edges unless the frames differ in height.
Steps to display the prints together
- Pick the location and orientation: Choose a wall or surface where both prints can be seen from the main viewing spot. Decide whether they will hang side by side or stacked before buying hardware. Check that the location receives indirect light rather than direct sun to reduce fading risk.
- Measure and mark the pair as one unit: Find the total width and height of both prints plus the gap between them. Mark the center of the pair on the wall at roughly eye level, then mark each print's center point from that reference. A common mistake is measuring each print separately and ending up with an uneven gap.
- Set a consistent gap: Use a gap of about 2 to 4 inches between the prints, or narrower than one print's width. Hold a spacer or ruler between them while marking hanger positions. If the frames are different depths, the gap may look uneven from an angle; adjust until it reads evenly from the main viewing spot.
- Install hardware and hang the prints: Attach the hanging hardware to the wall at your marked points, then hang the prints and check level with a spirit level. Adjust the wire or hanger height rather than moving the hardware if one print sits low. Test the weight of each print before hanging; use hardware rated for the frame and print size.
- Add an easel for a flexible second spot: If you want one print on a shelf or mantel, place it on the Petite Art Display Easel and keep the other on the wall. Angle the easel slightly toward the main seating area. Do not place the easel where it can be knocked over by pets or children.
- Light and review the arrangement: Step back to the main viewing distance and check that both prints are visible without glare. Adjust a lamp or curtain if one print falls into shadow. If the pair feels crowded, increase the gap slightly rather than moving one print to another wall.
Product facts for this pairing
- The Good Shepherd - Print: The Good Shepherd print uses acid-free archival inks on museum-grade fine art paper and carries the message "Be still and know." Archival materials help the print resist fading, so it can stay on display in a bright room with less worry.
The Good Shepherd - Print - Prodigal - Print: Prodigal depicts Christ kneeling in the grass with arms around a returning son, emphasizing compassion and forgiveness. Its emotional focus makes it a strong lower or central piece when paired with the shepherd image.
Prodigal - Print - Petite Art Display Easel: The Petite Art Display Easel measures 5 inches high by 3.375 inches wide by 3.5 inches deep and is cleaned with a dry cloth. Its small footprint suits a shelf or nightstand, but it is not sized for large wall prints.
